Key takeaways
- Rotsumamu Shrine is a Surface Shrine of Light in the Gerudo Highlands.
- Its trial, A Balanced Plan, uses three main inclined seesaw sections.
- The intended solution uses an iron barrel, a stone slab or board, and a stone block as counterweights.
- The shrine contains one treasure chest holding Large Zonaite.
- Completing the shrine grants one Light of Blessing.
- The shrine is near the Yiga Clan Hideout Chasm and can function as a useful fast-travel point for the hideout’s rear entrance after the relevant Yiga progression has been completed.
Overview
Rotsumamu Shrine is a Shrine of Light in The Legend of Zelda: Tears of the Kingdom. Its trial is called A Balanced Plan, a compact physics puzzle built around inclined seesaw platforms, counterweights and carefully timed movement. The shrine stands in the Gerudo Highlands beside the Yiga Clan Hideout Chasm, close to the rear approach to the Yiga Clan Hideout.
This guide covers the shrine itself and its immediate exterior entrance. It does not treat the Yiga Clan Hideout, the Yiga Blademaster Station, or the Depths below as part of Rotsumamu Shrine. Those are neighbouring or connected locations with their own content.
Location and boundaries
Rotsumamu Shrine is in the Gerudo Highlands, on rocky ground beside the entrance area associated with the Yiga Clan Hideout Chasm. It is positioned near the hideout’s rear approach, rather than inside the underground hideout itself. The shrine entrance is visible in the open air, making it possible to activate without first completing the Yiga Clan’s challenges.
The shrine’s correspondence with Umamustor Lightroot follows the game’s general Surface Shrine and Depths Lightroot relationship, but visiting the Lightroot is not required to solve Rotsumamu Shrine.
Named location directory
Only the first entry is inside the shrine scope of this guide. The others are neighbouring, connected or corresponding locations.
---
The following places should be kept separate
| Name | Details |
|---|---|
| Rotsumamu Shrine | the playable shrine interior and its entrance. |
| Yiga Clan Hideout Chasm | the nearby Depths entrance. |
| Yiga Clan Hideout | the Yiga settlement and its activities. |
| Yiga Blademaster Station | a separate Yiga-related location with its own access condition. |
| Umamustor Lightroot | the Depths counterpart beneath the surface shrine. |
Named location directory
Reaching the shrine
The most straightforward route is from the Gerudo Highlands Skyview Tower. Launch from the tower and glide towards the Yiga Clan Hideout Chasm. The shrine is near the chasm and stands out against the surrounding rocky terrain.
The shrine does not require a shrine quest or a special outfit. It is a normal puzzle shrine, although the nearby Yiga facilities have separate progression conditions and should not be confused with access to the shrine itself.
---
A practical approach is
- 01Travel to the Gerudo Highlands Skyview Tower.
- 02Launch into the air and glide towards the Yiga Clan Hideout Chasm.
- 03Look for the shrine structure beside the chasm entrance.
- 04Activate the shrine before entering, creating a fast-travel point.
- 05Enter when prepared to use Ultrahand, Recall and ordinary climbing or jumping.
Interior layout and puzzle design
Rotsumamu Shrine is essentially a vertical passage divided into several elevated sections. Each section uses a long, tilting platform that behaves like a seesaw. Link must make one end high enough to climb or run across, then repeat the process further inside.
The trial is less about building a complicated Zonai machine and more about understanding weight, leverage and timing. The shrine provides objects that can be attached to the seesaws with Ultrahand. Recall also provides an alternative way to restore a platform to a previous position after moving it.
Puzzle equipment directory
The exact appearance and placement of some loose objects can be easier to understand from the shrine’s geometry than from a map. The important point is that the barrel, slab and block are deliberately supplied as puzzle tools, not random equipment.
---
Full walkthrough
1. Cross the first incline
At the entrance, approach the first inclined platform. Run up it as quickly as possible. When Link reaches the upper end, jump towards the raised platform ahead.
This opening section can also be handled with Recall. If the platform has recently moved, Recall can temporarily replay its earlier position, allowing Link to use it as a route upwards. The straightforward running and jumping method is usually quicker.
2. Use the iron barrel as a counterweight
The second incline has a loose iron barrel nearby.
The barrel changes the balance of the platform. If the incline does not rise far enough, detach and reposition the barrel rather than trying to force the jump.
3. Prepare the large seesaw
The final major puzzle chamber contains a much larger incline. A heavy set of stone pieces is already attached to one side, so the platform is not balanced naturally.
Look around the chamber for the loose flat stone piece and the separate stone block. The shrine’s intended solution is to use these objects to alter the weight and reach of the large seesaw.
4. Reach the treasure chest
For the chest, attach the stone slab or board to the lighter end of the large incline. Position it so the slab forms a walkable extension towards the distant elevated platform.
Some walkthroughs describe using the stone block with the slab to provide additional weight. The precise order can vary slightly depending on how the platform has moved, but the objective is the same: use the supplied stone pieces to make the long seesaw reach the chest platform.
5. Raise the route to the exit
After collecting the chest, restore the large incline to a position that allows access to the exit platform. If the platform has fallen or shifted, use Ultrahand to lift the heavier end and hold it in place briefly.
The platform may settle again when released. That is intentional: Link is expected to use the momentary position to climb, or to combine the movement with Recall.
6. Use Recall to preserve the platform’s position
Recall is particularly useful if the seesaw is awkward to hold with Ultrahand. The shrine’s design allows both the intended counterweight approach and ability-based solutions.
7. Claim the Light of Blessing
At the end of the shrine, approach the altar and examine it. Completion grants a Light of Blessing.
There is no combat encounter or boss in the shrine. The meaningful rewards are the chest’s Large Zonaite and the Light of Blessing from the altar.
---
2. Use the iron barrel as a counterweight
- 01Pick up the barrel with Ultrahand.
- 02Attach it to one end of the seesaw.
- 03Position the attachment so that the opposite end rises high enough for Link to climb.
- 04Ascend the raised section and continue into the next area.
4. Reach the treasure chest: Then
- 01Use Ultrahand to attach the slab to the seesaw.
- 02Adjust the platform until the slab points towards the chest.
- 03Walk across the slab.
- 04Open the chest to receive Large Zonaite.
6. Use Recall to preserve the platform’s position: A reliable method is
- 01Move or lift the large incline into the useful position.
- 02Allow the platform to move or fall.
- 03Target it with Recall.
- 04While Recall replays its previous movement, climb the incline.
- 05Continue to the final chamber.
Alternative methods
Recall-focused method
Recall can reduce the amount of physical construction required:
This is especially helpful if a counterweight has been attached at an inconvenient angle.
Ultrahand-focused method
Ultrahand is also useful for moving a piece out of the way after opening the chest, allowing the same materials to be reused for the exit route.
---
Rewards and inventory
The Large Zonaite is a fixed chest item, not a random drop. The shrine contains no confirmed combat loot table or boss reward.
Reward directory
---
Rewards and inventory
| Reward | How to obtain | Notes |
|---|---|---|
| Large Zonaite | Open the chest in the large seesaw chamber | Fixed shrine chest reward |
| Light of Blessing | Complete the shrine and examine the altar | Counts towards stamina or Heart Container exchanges |
Nearby connections
Rotsumamu Shrine is particularly useful because of its position beside the Yiga Clan Hideout Chasm. It can serve as a convenient return point for exploring the surrounding Gerudo Highlands and for approaching the Yiga Clan’s rear entrance.
The relationship with the Yiga Hideout changes according to progression. The shrine itself remains accessible as a normal shrine, but the hideout’s rear entrance is tied to Yiga-related progression, including becoming a Yiga Blademaster. Before that access is unlocked, another approach to the hideout may be more convenient.
Related-area checklist
---
Hazards and secrets
The shrine’s main hazard is environmental rather than hostile. Falling from an incline can return Link to a lower section and may require repositioning the platform. There are no known enemies or boss fights in the puzzle route.
The chest is easy to overlook because it is reached through the large seesaw chamber rather than lying directly on the main exit path. Collect it before completing the final climb.
Practical tips
---
What is not present within the shrine
The following categories do not have confirmed shrine-specific entries in the researched material:
The nearby Yiga Clan Hideout has characters, faction activities and services, but those belong to the hideout rather than to Rotsumamu Shrine and should be documented separately.
---
Lore and trivia
The shrine’s name is sometimes rendered inconsistently in third-party material, including map listings that use variants such as “Rotsamamu” or “Rotsumamum”. The in-game shrine name used for this guide is Rotsumamu Shrine. The trial name is A Balanced Plan.
Rotsumamu also has a recognised Depths counterpart in Umamustor Lightroot, reinforcing the Surface Shrine and Lightroot alignment used throughout Tears of the Kingdom.